org.scijava.java3d

Class PointSound

java.lang.Object

org.scijava.java3d.SceneGraphObject

org.scijava.java3d.Node

org.scijava.java3d.Leaf

org.scijava.java3d.Sound

org.scijava.java3d.PointSound

Direct Known Subclasses:

ConeSound

public class PointSound
extends Sound

The PointSound node (a sub-class of the Sound node) defines a spatially located sound source whose waves radiate uniformly in all directions from a given location in space. It has the same attributes as a Sound object with the addition of a location and the specification of distance-based gain attenuation for listener positions between an array of distances.

A sound's amplitude is attenuated based on the distance between the listener and the sound source position. A piecewise linear curve (defined in terms of pairs of distance and gain scale factor) specifies the gain scale factor slope. The PointSound's location and attenuation distances are defined in the local coordinate system of the node.

Distance Gain Attenuation

Associated with distances from the listener to the sound source via an array of (distance, gain-scale-factor) pairs. The gain scale factor applied to the sound source is the linear interpolated gain value between the distance value range that includes the current distance from the listener to the sound source. If the distance from the listener to the sound source is less than the first distance in the array, the first gain scale factor is applied to the sound source. This creates a spherical region around the listener within which all sound gain is uniformly scaled by the first gain in the array. If the distance from the listener to the sound source is greater than the last distance in the array, the last gain scale factor is applied to the sound source.

Distance elements in this array of Point2f is a monotonically-increasing set of floating point numbers measured from the location of the sound source. Gain scale factors elements in this list of pairs can be any positive floating point numbers. While for most applications this list of gain scale factors will usually be monotonically-decreasing, they do not have to be. If this is not set, no distance gain attenuation is performed (equivalent to using a distance gain of 1.0 for all distances).

getDistanceGainLength method returns the length of the distance gain attenuation arrays. Arrays passed into getDistanceGain methods should all be at least this size.

There are two methods for getDistanceGain, one returning an array of points, the other returning separate arrays for each attenuation component.

Field Summary

Fields

Modifier and Type	Field and Description
static int	ALLOW_DISTANCE_GAIN_READ Specifies that this node allows access to its object's distance gain attenuation information.
static int	ALLOW_DISTANCE_GAIN_WRITE Specifies that this node allows writing to its object's distance gain attenuation information.
static int	ALLOW_POSITION_READ Specifies that this node allows access to its object's position information.
static int	ALLOW_POSITION_WRITE Specifies that this node allows writing to its object's position information.

Fields inherited from class org.scijava.java3d.Sound

ALLOW_CHANNELS_USED_READ, ALLOW_CONT_PLAY_READ, ALLOW_CONT_PLAY_WRITE, ALLOW_DURATION_READ, ALLOW_ENABLE_READ, ALLOW_ENABLE_WRITE, ALLOW_INITIAL_GAIN_READ, ALLOW_INITIAL_GAIN_WRITE, ALLOW_IS_PLAYING_READ, ALLOW_IS_READY_READ, ALLOW_LOOP_READ, ALLOW_LOOP_WRITE, ALLOW_MUTE_READ, ALLOW_MUTE_WRITE, ALLOW_PAUSE_READ, ALLOW_PAUSE_WRITE, ALLOW_PRIORITY_READ, ALLOW_PRIORITY_WRITE, ALLOW_RATE_SCALE_FACTOR_READ, ALLOW_RATE_SCALE_FACTOR_WRITE, ALLOW_RELEASE_READ, ALLOW_RELEASE_WRITE, ALLOW_SCHEDULING_BOUNDS_READ, ALLOW_SCHEDULING_BOUNDS_WRITE, ALLOW_SOUND_DATA_READ, ALLOW_SOUND_DATA_WRITE, DURATION_UNKNOWN, INFINITE_LOOPS, NO_FILTER

Fields inherited from class org.scijava.java3d.Node

ALLOW_AUTO_COMPUTE_BOUNDS_READ, ALLOW_AUTO_COMPUTE_BOUNDS_WRITE, ALLOW_BOUNDS_READ, ALLOW_BOUNDS_WRITE, ALLOW_COLLIDABLE_READ, ALLOW_COLLIDABLE_WRITE, ALLOW_LOCAL_TO_VWORLD_READ, ALLOW_LOCALE_READ, ALLOW_PARENT_READ, ALLOW_PICKABLE_READ, ALLOW_PICKABLE_WRITE, ENABLE_COLLISION_REPORTING, ENABLE_PICK_REPORTING

Constructor Summary

Constructors

Constructor and Description
PointSound() Constructs and initializes a new PointSound node using default parameters.
PointSound(MediaContainer soundData, float initialGain, float posX, float posY, float posZ) Constructs a PointSound node object using only the provided parameter values for sound data, sample gain, and position.
PointSound(MediaContainer soundData, float initialGain, int loopCount, boolean release, boolean continuous, boolean enable, Bounds region, float priority, float posX, float posY, float posZ, float[] attenuationDistance, float[] attenuationGain) Construct a PointSound object accepting individual float parameters for the elements of the position points, and accepting separate arrays for the distance and gain scale factors components of distance attenuation.
PointSound(MediaContainer soundData, float initialGain, int loopCount, boolean release, boolean continuous, boolean enable, Bounds region, float priority, float posX, float posY, float posZ, org.scijava.vecmath.Point2f[] distanceGain) Construct a PointSound object accepting individual float parameters for the elements of the position point, and accepting an array of Point2f for the distance attenuation values where each pair in the array contains a distance and a gain scale factor.
PointSound(MediaContainer soundData, float initialGain, int loopCount, boolean release, boolean continuous, boolean enable, Bounds region, float priority, org.scijava.vecmath.Point3f position, float[] attenuationDistance, float[] attenuationGain) Construct a PointSound object accepting points as input for the position.
PointSound(MediaContainer soundData, float initialGain, int loopCount, boolean release, boolean continuous, boolean enable, Bounds region, float priority, org.scijava.vecmath.Point3f position, org.scijava.vecmath.Point2f[] distanceGain) Construct a PointSound object accepting Point3f as input for the position and accepting an array of Point2f for the distance attenuation values where each pair in the array contains a distance and a gain scale factor.
PointSound(MediaContainer soundData, float initialGain, org.scijava.vecmath.Point3f position) Constructs a PointSound node object using only the provided parameter values for sound data, sample gain, and position.

Method Summary

Methods

Modifier and Type	Method and Description
Node	cloneNode(boolean forceDuplicate) Creates a new instance of the node.
void	duplicateNode(Node originalNode, boolean forceDuplicate) Copies all node information from originalNode into the current node.
void	getDistanceGain(float[] distance, float[] gain) Gets this sound's distance gain attenuation values in separate arrays.
void	getDistanceGain(org.scijava.vecmath.Point2f[] attenuation) Gets this sound's distance attenuation.
int	getDistanceGainLength() Get the length of this node's distance gain attenuation arrays.
void	getPosition(org.scijava.vecmath.Point3f position) Retrieves this sound's direction and places it in the vector provided.
void	setDistanceGain(float[] distance, float[] gain) Sets this sound's distance gain attenuation as an array of Point2fs.
void	setDistanceGain(org.scijava.vecmath.Point2f[] attenuation) Sets this sound's distance gain attenuation - where gain scale factor is applied to sound based on distance listener is from sound source.
void	setPosition(float x, float y, float z) Sets this sound's position from the three values provided.
void	setPosition(org.scijava.vecmath.Point3f position) Sets this sound's location from the vector provided.

Methods inherited from class org.scijava.java3d.Sound

getContinuousEnable, getDuration, getEnable, getInitialGain, getLoop, getMute, getNumberOfChannelsUsed, getNumberOfChannelsUsed, getPause, getPriority, getRateScaleFactor, getReleaseEnable, getSchedulingBoundingLeaf, getSchedulingBounds, getSoundData, isPlaying, isPlaying, isPlayingSilently, isPlayingSilently, isReady, isReady, setContinuousEnable, setEnable, setInitialGain, setLoop, setMute, setPause, setPriority, setRateScaleFactor, setReleaseEnable, setSchedulingBoundingLeaf, setSchedulingBounds, setSoundData, updateNodeReferences

Methods inherited from class org.scijava.java3d.Node

cloneTree, cloneTree, cloneTree, cloneTree, cloneTree, cloneTree, getBounds, getBoundsAutoCompute, getCollidable, getLocale, getLocalToVworld, getLocalToVworld, getParent, getPickable, setBounds, setBoundsAutoCompute, setCollidable, setPickable

Methods inherited from class org.scijava.java3d.SceneGraphObject

clearCapability, clearCapabilityIsFrequent, duplicateSceneGraphObject, getCapability, getCapabilityIsFrequent, getName, getUserData, isCompiled, isLive, setCapability, setCapabilityIsFrequent, setName, setUserData, toString

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Detail

ALLOW_POSITION_READ

public static final int ALLOW_POSITION_READ

Specifies that this node allows access to its object's position information.

See Also:

Constant Field Values

ALLOW_POSITION_WRITE

public static final int ALLOW_POSITION_WRITE

Specifies that this node allows writing to its object's position information.

See Also:

Constant Field Values

ALLOW_DISTANCE_GAIN_READ

public static final int ALLOW_DISTANCE_GAIN_READ

Specifies that this node allows access to its object's distance gain attenuation information.

See Also:

Constant Field Values

ALLOW_DISTANCE_GAIN_WRITE

public static final int ALLOW_DISTANCE_GAIN_WRITE

Specifies that this node allows writing to its object's distance gain attenuation information.

See Also:

Constant Field Values

Constructor Detail

PointSound

public PointSound()

Constructs and initializes a new PointSound node using default parameters. The following default values are used:

position vector: (0.0, 0.0, 0.0)
Back attenuation: null
distance gain attenuation: null (no attenuation performed)

PointSound

public PointSound(MediaContainer soundData,
          float initialGain,
          org.scijava.vecmath.Point3f position)

Constructs a PointSound node object using only the provided parameter values for sound data, sample gain, and position. The remaining fields are set to the above default values. This form uses a point as input for its position.

Parameters:

soundData - sound data associated with this sound source node

initialGain - amplitude scale factor applied to sound source

position - 3D location of source

PointSound

public PointSound(MediaContainer soundData,
          float initialGain,
          float posX,
          float posY,
          float posZ)

Constructs a PointSound node object using only the provided parameter values for sound data, sample gain, and position. The remaining fields are set to to the above default values. This form uses individual float parameters for the elements of the position point.

Parameters:

soundData - sound data associated with this sound source node

initialGain - amplitude scale factor applied to sound source data

posX - x coordinate of location of source

posY - y coordinate of location of source

posZ - z coordinate of location of source

PointSound

public PointSound(MediaContainer soundData,
          float initialGain,
          int loopCount,
          boolean release,
          boolean continuous,
          boolean enable,
          Bounds region,
          float priority,
          org.scijava.vecmath.Point3f position,
          org.scijava.vecmath.Point2f[] distanceGain)

Construct a PointSound object accepting Point3f as input for the position and accepting an array of Point2f for the distance attenuation values where each pair in the array contains a distance and a gain scale factor.

Parameters:

soundData - sound data associated with this sound source node

initialGain - amplitude scale factor applied to sound source

loopCount - number of times loop is looped

release - flag denoting playing sound data to end

continuous - denotes that sound silently plays when disabled

enable - sound switched on/off

region - scheduling bounds

priority - playback ranking value

position - 3D location of source

distanceGain - array of (distance,gain) pairs controling attenuation

PointSound

public PointSound(MediaContainer soundData,
          float initialGain,
          int loopCount,
          boolean release,
          boolean continuous,
          boolean enable,
          Bounds region,
          float priority,
          float posX,
          float posY,
          float posZ,
          org.scijava.vecmath.Point2f[] distanceGain)

Construct a PointSound object accepting individual float parameters for the elements of the position point, and accepting an array of Point2f for the distance attenuation values where each pair in the array contains a distance and a gain scale factor.

Parameters:

soundData - sound data associated with this sound source node

initialGain - amplitude scale factor applied to sound source

loopCount - number of times loop is looped

release - flag denoting playing sound to end

continuous - denotes that sound silently plays when disabled

enable - sound switched on/off

region - scheduling bounds

priority - playback ranking value

posX - x coordinate of location of source

posY - y coordinate of location of source

posZ - z coordinate of location of source

distanceGain - array of (distance,gain) pairs controling attenuation

PointSound

public PointSound(MediaContainer soundData,
          float initialGain,
          int loopCount,
          boolean release,
          boolean continuous,
          boolean enable,
          Bounds region,
          float priority,
          org.scijava.vecmath.Point3f position,
          float[] attenuationDistance,
          float[] attenuationGain)

Construct a PointSound object accepting points as input for the position. and accepting separate arrays for the distance and gain scale factors components of distance attenuation.

Parameters:

soundData - sound data associated with this sound source node

initialGain - amplitude scale factor applied to sound source

loopCount - number of times loop is looped

release - flag denoting playing sound data to end

continuous - denotes that sound silently plays when disabled

enable - sound switched on/off

region - scheduling bounds

priority - playback ranking value

position - 3D location of source

attenuationDistance - array of distance values used for attenuation

attenuationGain - array of gain scale factors used for attenuation

PointSound

public PointSound(MediaContainer soundData,
          float initialGain,
          int loopCount,
          boolean release,
          boolean continuous,
          boolean enable,
          Bounds region,
          float priority,
          float posX,
          float posY,
          float posZ,
          float[] attenuationDistance,
          float[] attenuationGain)

Construct a PointSound object accepting individual float parameters for the elements of the position points, and accepting separate arrays for the distance and gain scale factors components of distance attenuation.

Parameters:

soundData - sound data associated with this sound source node

initialGain - amplitude scale factor applied to sound source

loopCount - number of times loop is looped

release - flag denoting playing sound to end

continuous - denotes that sound silently plays when disabled

enable - sound switched on/off

region - scheduling bounds

priority - playback ranking value

posX - x coordinate of location of source

posY - y coordinate of location of source

posZ - z coordinate of location of source

attenuationDistance - array of distance values used for attenuation

attenuationGain - array of gain scale factors used for attenuation

Method Detail

setPosition

public void setPosition(org.scijava.vecmath.Point3f position)

Sets this sound's location from the vector provided.

Parameters:

position - the new location

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setPosition

public void setPosition(float x,
               float y,
               float z)

Sets this sound's position from the three values provided.

Parameters:

x - the new x position

y - the new y position

z - the new z position

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

getPosition

public void getPosition(org.scijava.vecmath.Point3f position)

Retrieves this sound's direction and places it in the vector provided.

Parameters:

position - the variable to receive the direction vector

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setDistanceGain

public void setDistanceGain(org.scijava.vecmath.Point2f[] attenuation)

Sets this sound's distance gain attenuation - where gain scale factor is applied to sound based on distance listener is from sound source. This form of setDistanceGain takes these pairs of values as an array of Point2f.

Parameters:

attenuation - defined by pairs of (distance,gain-scale-factor)

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setDistanceGain

public void setDistanceGain(float[] distance,
                   float[] gain)

Sets this sound's distance gain attenuation as an array of Point2fs. This form of setDistanceGain accepts two separate arrays for these values. The distance and gainScale arrays should be of the same length. If the gainScale array length is greater than the distance array length, the gainScale array elements beyond the length of the distance array are ignored. If the gainScale array is shorter than the distance array, the last gainScale array value is repeated to fill an array of length equal to distance array.

Parameters:

distance - array of monotonically-increasing floats

gain - array of non-negative scale factors

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

getDistanceGainLength

public int getDistanceGainLength()

Get the length of this node's distance gain attenuation arrays.

Returns:

distance gain attenuation array length

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

getDistanceGain

public void getDistanceGain(org.scijava.vecmath.Point2f[] attenuation)

Gets this sound's distance attenuation. The distance attenuation pairs are copied into the specified array. The array must be large enough to hold all of the points. The individual array elements must be allocated by the caller.

Parameters:

attenuation - arrays containing distance attenuation pairs

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

getDistanceGain

public void getDistanceGain(float[] distance,
                   float[] gain)

Gets this sound's distance gain attenuation values in separate arrays. The arrays must be large enough to hold all of the values.

Parameters:

distance - array of float distance from sound source

gain - array of non-negative scale factors associated with

Throws:

CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

cloneNode

public Node cloneNode(boolean forceDuplicate)

Creates a new instance of the node. This routine is called by cloneTree to duplicate the current node.

Overrides:

cloneNode in class Node

Parameters:

forceDuplicate - when set to true, causes the duplicateOnCloneTree flag to be ignored. When false, the value of each node's duplicateOnCloneTree variable determines whether NodeComponent data is duplicated or copied.

See Also:

Node.cloneTree(), Node.cloneNode(boolean), Node.duplicateNode(org.scijava.java3d.Node, boolean), NodeComponent.setDuplicateOnCloneTree(boolean)

duplicateNode

public void duplicateNode(Node originalNode,
                 boolean forceDuplicate)

Copies all node information from originalNode into the current node. This method is called from the cloneNode method which is, in turn, called by the cloneTree method.

For any NodeComponent objects contained by the object being duplicated, each NodeComponent object's duplicateOnCloneTree value is used to determine whether the NodeComponent should be duplicated in the new node or if just a reference to the current node should be placed in the new node. This flag can be overridden by setting the forceDuplicate parameter in the cloneTree method to true.
NOTE: Applications should not call this method directly. It should only be called by the cloneNode method.

Overrides:

duplicateNode in class Node

Parameters:

originalNode - the original node to duplicate.

forceDuplicate - when set to true, causes the duplicateOnCloneTree flag to be ignored. When false, the value of each node's duplicateOnCloneTree variable determines whether NodeComponent data is duplicated or copied.

Throws:

ClassCastException - if originalNode is not an instance of PointSound

See Also:

Node.cloneTree(), Node.cloneNode(boolean), NodeComponent.setDuplicateOnCloneTree(boolean)