Package javaforce.codec.speex
Class SbEncoder
java.lang.Object
javaforce.codec.speex.NbCodec
javaforce.codec.speex.SbCodec
javaforce.codec.speex.SbEncoder
Wideband Speex Encoder
- Version:
- $Revision$
- Author:
- Marc Gimpel, Wimba S.A. (mgimpel@horizonwimba.com)
-
Field Summary
FieldsModifier and TypeFieldDescriptionprotected floatprotected floatRelative quality that will be needed by VBRprotected floatprotected int1 for enabling VAD, 0 otherwiseprotected intprotected EncoderThe encoder for the lower half of the Spectrum.protected intstatic final int[]The Narrowband Quality map indicates which narrowband submode to use for the given wideband/ultra-wideband quality settingprotected floatQuality setting for VBR encodingprotected intprotected intstatic final int[]The Ultra-wideband Quality map indicates which sideband submode to use for the given ultra-wideband quality settingprotected int1 for enabling VBR, 0 otherwiseprotected intComplexity setting (0-10 from least complex to most complex)protected floatABR setting (in bps), 0 if offstatic final int[]The Wideband Quality map indicates which sideband submode to use for the given wideband/ultra-wideband quality settingFields inherited from class javaforce.codec.speex.SbCodec
foldingGain, fullFrameSize, g0_mem, g1_mem, high, QMF_ORDER, SB_FRAME_SIZE, SB_SUBMODE_BITS, SB_SUBMODES, x0d, y0, y1Fields inherited from class javaforce.codec.speex.NbCodec
awk1, awk2, awk3, bufSize, dtx_enabled, exc_gain_quant_scal1, exc_gain_quant_scal3, excBuf, excIdx, filters, first, frameSize, frmBuf, frmIdx, gamma1, gamma2, innov, interp_qlpc, interp_qlsp, lag_factor, lpc, lpc_floor, lpcSize, m_lsp, max_pitch, mem_sp, min_pitch, NB_FRAME_SIZE, NB_SUBMODE_BITS, NB_SUBMODES, nbSubframes, old_qlsp, pi_gain, pre_mem, preemph, qlsp, subframeSize, submodeID, submodes, VERY_SMALL, voc_m1, voc_m2, voc_mean, voc_offset, windowSizeFields inherited from interface javaforce.codec.speex.Codebook
cdbk_nb, cdbk_nb_high1, cdbk_nb_high2, cdbk_nb_low1, cdbk_nb_low2, exc_10_16_table, exc_10_32_table, exc_20_32_table, exc_5_256_table, exc_5_64_table, exc_8_128_table, gain_cdbk_lbr, gain_cdbk_nb, h0, h1, hexc_10_32_table, hexc_table, high_lsp_cdbk, high_lsp_cdbk2, NB_CDBK_SIZE, NB_CDBK_SIZE_HIGH1, NB_CDBK_SIZE_HIGH2, NB_CDBK_SIZE_LOW1, NB_CDBK_SIZE_LOW2 -
Constructor Summary
Constructors -
Method Summary
Modifier and TypeMethodDescriptionintEncode the given input signal.intgetAbr()Returns the Average Bit Rate used (0 if ABR is not turned on).intReturns the bitrate.intReturns the algorthmic complexity.intReturns the size in bits of an audio frame encoded with the current mode.intReturn LookAhead.intgetMode()Returns the encoding submode currently in use.floatReturns the relative quality.intReturns the sampling rate.booleangetVad()Returns whether or not we are using Voice Activity Detection encoding.booleangetVbr()Returns whether or not we are using Variable Bit Rate encoding.floatReturns the Varible Bit Rate Quality.voidinit(int frameSize, int subframeSize, int lpcSize, int bufSize, float foldingGain) InitialisationvoidsetAbr(int abr) Sets the Average Bit Rate.voidsetBitRate(int bitrate) Sets the bitrate.voidsetComplexity(int complexity) Sets the algorthmic complexity.voidsetDtx(boolean dtx) Sets whether or not to use Discontinuous Transmission encoding.voidsetMode(int mode) Sets the encoding submode.voidsetQuality(int quality) Sets the Quality.voidsetSamplingRate(int rate) Sets the sampling rate.voidsetVad(boolean vad) Sets whether or not to use Voice Activity Detection encoding.voidsetVbr(boolean vbr) Sets whether or not to use Variable Bit Rate encoding.voidsetVbrQuality(float quality) Sets the Varible Bit Rate Quality.voiduwbinit()Ultra-wideband initialisationvoidwbinit()Wideband initialisationMethods inherited from class javaforce.codec.speex.SbCodec
buildUwbSubModes, buildWbSubModes, getDtx, getExc, getFrameSize, getInnov
-
Field Details
-
NB_QUALITY_MAP
public static final int[] NB_QUALITY_MAPThe Narrowband Quality map indicates which narrowband submode to use for the given wideband/ultra-wideband quality setting -
WB_QUALITY_MAP
public static final int[] WB_QUALITY_MAPThe Wideband Quality map indicates which sideband submode to use for the given wideband/ultra-wideband quality setting -
UWB_QUALITY_MAP
public static final int[] UWB_QUALITY_MAPThe Ultra-wideband Quality map indicates which sideband submode to use for the given ultra-wideband quality setting -
lowenc
The encoder for the lower half of the Spectrum. -
nb_modes
protected int nb_modes -
complexity
protected int complexity -
vbr_enabled
protected int vbr_enabledComplexity setting (0-10 from least complex to most complex) -
vad_enabled
protected int vad_enabled1 for enabling VBR, 0 otherwise -
abr_enabled
protected int abr_enabled1 for enabling VAD, 0 otherwise -
vbr_quality
protected float vbr_qualityABR setting (in bps), 0 if off -
relative_quality
protected float relative_qualityQuality setting for VBR encoding -
abr_drift
protected float abr_driftRelative quality that will be needed by VBR -
abr_drift2
protected float abr_drift2 -
abr_count
protected float abr_count -
sampling_rate
protected int sampling_rate -
submodeSelect
protected int submodeSelect
-
-
Constructor Details
-
SbEncoder
public SbEncoder()
-
-
Method Details
-
wbinit
public void wbinit()Wideband initialisation -
uwbinit
public void uwbinit()Ultra-wideband initialisation -
init
public void init(int frameSize, int subframeSize, int lpcSize, int bufSize, float foldingGain) Initialisation -
encode
Encode the given input signal. -
getEncodedFrameSize
public int getEncodedFrameSize()Returns the size in bits of an audio frame encoded with the current mode.- Specified by:
getEncodedFrameSizein interfaceEncoder- Returns:
- the size in bits of an audio frame encoded with the current mode.
-
setQuality
public void setQuality(int quality) Sets the Quality.- Specified by:
setQualityin interfaceEncoder- Parameters:
quality-
-
setVbrQuality
public void setVbrQuality(float quality) Sets the Varible Bit Rate Quality.- Specified by:
setVbrQualityin interfaceEncoder- Parameters:
quality-
-
setVbr
public void setVbr(boolean vbr) Sets whether or not to use Variable Bit Rate encoding. -
setAbr
public void setAbr(int abr) Sets the Average Bit Rate. -
getBitRate
public int getBitRate()Returns the bitrate.- Specified by:
getBitRatein interfaceEncoder- Returns:
- the bitrate.
-
setSamplingRate
public void setSamplingRate(int rate) Sets the sampling rate.- Specified by:
setSamplingRatein interfaceEncoder- Parameters:
rate-
-
getLookAhead
public int getLookAhead()Return LookAhead.- Specified by:
getLookAheadin interfaceEncoder- Returns:
- LookAhead.
-
setMode
public void setMode(int mode) Sets the encoding submode. -
getMode
public int getMode()Returns the encoding submode currently in use. -
setBitRate
public void setBitRate(int bitrate) Sets the bitrate.- Specified by:
setBitRatein interfaceEncoder- Parameters:
bitrate-
-
getVbr
public boolean getVbr()Returns whether or not we are using Variable Bit Rate encoding. -
setVad
public void setVad(boolean vad) Sets whether or not to use Voice Activity Detection encoding. -
getVad
public boolean getVad()Returns whether or not we are using Voice Activity Detection encoding. -
setDtx
public void setDtx(boolean dtx) Sets whether or not to use Discontinuous Transmission encoding. -
getAbr
public int getAbr()Returns the Average Bit Rate used (0 if ABR is not turned on). -
getVbrQuality
public float getVbrQuality()Returns the Varible Bit Rate Quality.- Specified by:
getVbrQualityin interfaceEncoder- Returns:
- the Varible Bit Rate Quality.
-
setComplexity
public void setComplexity(int complexity) Sets the algorthmic complexity.- Specified by:
setComplexityin interfaceEncoder- Parameters:
complexity-
-
getComplexity
public int getComplexity()Returns the algorthmic complexity.- Specified by:
getComplexityin interfaceEncoder- Returns:
- the algorthmic complexity.
-
getSamplingRate
public int getSamplingRate()Returns the sampling rate.- Specified by:
getSamplingRatein interfaceEncoder- Returns:
- the sampling rate.
-
getRelativeQuality
public float getRelativeQuality()Returns the relative quality.- Specified by:
getRelativeQualityin interfaceEncoder- Returns:
- the relative quality.
-