Uses of Package
tss.tpm

Packages that use tss.tpm

Package	Description
tss
tss.tpm

Classes in tss.tpm used by tss

Class and Description
AC_GetCapabilityResponse The purpose of this command is to obtain information about an Attached Component referenced by an AC handle.
CertifyCreationResponse This command is used to prove the association between an object and its creation data.
CertifyResponse The purpose of this command is to prove that an object with a specific Name is loaded in the TPM.
CommitResponse TPM2_Commit() performs the first part of an ECC anonymous signing operation.
CreateLoadedResponse This command creates an object and loads it in the TPM.
CreatePrimaryResponse This command is used to create a Primary Object under one of the Primary Seeds or a Temporary Object under TPM_RH_NULL.
CreateResponse This command is used to create an object that can be loaded into a TPM using TPM2_Load().
DuplicateResponse This command duplicates a loaded object so that it may be used in a different hierarchy.
EC_EphemeralResponse TPM2_EC_Ephemeral() creates an ephemeral key for use in a two-phase key exchange protocol.
ECDH_KeyGenResponse This command uses the TPM to generate an ephemeral key pair (de, Qe where Qe [de]G).
EncryptDecrypt2Response This command is identical to TPM2_EncryptDecrypt(), except that the inData parameter is the first parameter.
EncryptDecryptResponse NOTE 1 This command is deprecated, and TPM2_EncryptDecrypt2() is preferred.
FieldUpgradeDataResponse This command will take the actual field upgrade image to be installed on the TPM.
GetCapabilityResponse This command returns various information regarding the TPM and its current state.
GetCommandAuditDigestResponse This command returns the current value of the command audit digest, a digest of the commands being audited, and the audit hash algorithm.
GetSessionAuditDigestResponse This command returns a digital signature of the audit session digest.
GetTestResultResponse This command returns manufacturer-specific information regarding the results of a self-test and an indication of the test status.
GetTimeResponse This command returns the current values of Time and Clock.
HashResponse This command performs a hash operation on a data buffer and returns the results.
MakeCredentialResponse This command allows the TPM to perform the actions required of a Certificate Authority (CA) in creating a TPM2B_ID_OBJECT containing an activation credential.
NV_CertifyResponse The purpose of this command is to certify the contents of an NV Index or portion of an NV Index.
NV_ReadPublicResponse This command is used to read the public area and Name of an NV Index.
PCR_AllocateResponse This command is used to set the desired PCR allocation of PCR and algorithms.
PCR_ReadResponse This command returns the values of all PCR specified in pcrSelectionIn.
PolicySecretResponse This command includes a secret-based authorization to a policy.
PolicySignedResponse This command includes a signed authorization in a policy.
QuoteResponse This command is used to quote PCR values.
ReadPublicResponse This command allows access to the public area of a loaded object.
RewrapResponse This command allows the TPM to serve in the role as a Duplication Authority.
SequenceCompleteResponse This command adds the last part of data, if any, to a hash/HMAC sequence and returns the result.
StartAuthSessionResponse This command is used to start an authorization session using alternative methods of establishing the session key (sessionKey).
TPM_ALG_ID Table 2 is the list of algorithms to which the TCG has assigned an algorithm identifier along with its numeric identifier.
TPM_AT These constants are used in TPM2_AC_GetCapability() to indicate the first tagged value returned from an attached component.
TPM_CAP The TPM_CAP values are used in TPM2_GetCapability() to select the type of the value to be returned.
TPM_CC Table 12 lists the command codes and their attributes.
TPM_CLOCK_ADJUST A TPM_CLOCK_ADJUST value is used to change the rate at which the TPM internal oscillator is divided.
TPM_ECC_CURVE Table 3 is the list of identifiers for TCG-registered curve ID values for elliptic curve cryptography.
TPM_EO Table 18 Definition of (UINT16) TPM_EO Constants (IN/OUT)
TPM_HANDLE TPM object handle (and related data)
TPM_PT The TPM_PT constants are used in TPM2_GetCapability(capability = TPM_CAP_TPM_PROPERTIES) to indicate the property being selected or returned.
TPM_RC In general, response codes defined in TPM 2.0 Part 2 will be unmarshaling errors and will have the F (format) bit SET.
TPM_SE This type is used in TPM2_StartAuthSession() to indicate the type of the session to be created.
TPM_SU These values are used in TPM2_Startup() to indicate the shutdown and startup mode.
TPM2B_DIGEST This structure is used for a sized buffer that cannot be larger than the largest digest produced by any hash algorithm implemented on the TPM.
TPM2B_PRIVATE The TPM2B_PRIVATE structure is used as a parameter in multiple commands that create, load, and modify the sensitive area of an object.
TPM2B_PUBLIC_KEY_RSA This sized buffer holds the largest RSA public key supported by the TPM.
TPMA_LOCALITY In a TPMS_CREATION_DATA structure, this structure is used to indicate the locality of the command that created the object.
TPMS_AC_OUTPUT TPMS_AC_OUTPUT is used to return information about an AC.
TPMS_ALGORITHM_DETAIL_ECC This structure is used to report on the curve parameters of an ECC curve.
TPMS_CONTEXT This structure is used in TPM2_ContextLoad() and TPM2_ContextSave().
TPMS_ECC_POINT This structure holds two ECC coordinates that, together, make up an ECC point.
TPMS_ID_OBJECT This structure is used for sizing the TPM2B_ID_OBJECT.
TPMS_NV_PUBLIC This structure describes an NV Index.
TPMS_PCR_SELECTION Table 87 Definition of TPMS_PCR_SELECTION Structure
TPMS_RSA_PARMS A TPM compatible with this specification and supporting RSA shall support two primes and an exponent of zero.
TPMS_SENSITIVE_CREATE This structure defines the values to be placed in the sensitive area of a created object.
TPMS_TIME_INFO This structure is used in the TPM2_GetTime() attestation.
TPMT_HA TPM Hash structure
TPMT_PUBLIC Table 191 defines the public area structure.
TPMT_SENSITIVE Table 196 Definition of TPMT_SENSITIVE Structure
TPMT_SYM_DEF The TPMT_SYM_DEF structure is used to select an algorithm to be used for parameter encryption in those cases when different symmetric algorithms may be selected.
TPMT_SYM_DEF_OBJECT This structure is used when different symmetric block cipher (not XOR) algorithms may be selected.
TPMT_TK_AUTH This ticket is produced by TPM2_PolicySigned() and TPM2_PolicySecret() when the authorization has an expiration time.
TPMT_TK_CREATION This ticket is produced by TPM2_Create() or TPM2_CreatePrimary().
TPMT_TK_HASHCHECK This ticket is produced by TPM2_SequenceComplete() when the message that was digested did not start with TPM_GENERATED_VALUE.
TPMT_TK_VERIFIED This ticket is produced by TPM2_VerifySignature().
TPMU_ASYM_SCHEME This union of all asymmetric schemes is used in each of the asymmetric scheme structures.
TPMU_PUBLIC_PARMS Table 189 defines the possible parameter definition structures that may be contained in the public portion of a key.
TPMU_SIG_SCHEME The union of all of the signature schemes.
TPMU_SIGNATURE A TPMU_SIGNATURE_COMPOSITE is a union of the various signatures that are supported by a particular TPM implementation.
ZGen_2PhaseResponse This command supports two-phase key exchange protocols.

Classes in tss.tpm used by tss.tpm

Class and Description
_PRIVATE This structure is defined to size the contents of a TPM2B_PRIVATE.
AC_GetCapabilityResponse The purpose of this command is to obtain information about an Attached Component referenced by an AC handle.
AC_SendResponse The purpose of this command is to send (copy) a loaded object from the TPM to an Attached Component.
ActivateCredentialResponse This command enables the association of a credential with an object in a way that ensures that the TPM has validated the parameters of the credentialed object.
AUTHResponse This is the format for each of the authorizations in the session area of the response.
CertifyCreationResponse This command is used to prove the association between an object and its creation data.
CertifyResponse The purpose of this command is to prove that an object with a specific Name is loaded in the TPM.
ChangeEPSResponse This replaces the current endorsement primary seed (EPS) with a value from the RNG and sets the Endorsement hierarchy controls to their default initialization values: ehEnable is SET, endorsementAuth and endorsementPolicy are both set to the Empty Buffer.
ChangePPSResponse This replaces the current platform primary seed (PPS) with a value from the RNG and sets platformPolicy to the default initialization value (the Empty Buffer).
ClearControlResponse TPM2_ClearControl() disables and enables the execution of TPM2_Clear().
ClearResponse This command removes all TPM context associated with a specific Owner.
ClockRateAdjustResponse This command adjusts the rate of advance of Clock and Time to provide a better approximation to real time.
ClockSetResponse This command is used to advance the value of the TPMs Clock.
CommandHeader Command header [tss]
CommitResponse TPM2_Commit() performs the first part of an ECC anonymous signing operation.
ContextLoadResponse This command is used to reload a context that has been saved by TPM2_ContextSave().
ContextSaveResponse This command saves a session context, object context, or sequence object context outside the TPM.
CreateLoadedResponse This command creates an object and loads it in the TPM.
CreatePrimaryResponse This command is used to create a Primary Object under one of the Primary Seeds or a Temporary Object under TPM_RH_NULL.
CreateResponse This command is used to create an object that can be loaded into a TPM using TPM2_Load().
DictionaryAttackLockResetResponse This command cancels the effect of a TPM lockout due to a number of successive authorization failures.
DictionaryAttackParametersResponse This command changes the lockout parameters.
DuplicateResponse This command duplicates a loaded object so that it may be used in a different hierarchy.
EC_EphemeralResponse TPM2_EC_Ephemeral() creates an ephemeral key for use in a two-phase key exchange protocol.
ECC_ParametersResponse This command returns the parameters of an ECC curve identified by its TCG-assigned curveID.
ECDH_KeyGenResponse This command uses the TPM to generate an ephemeral key pair (de, Qe where Qe [de]G).
ECDH_ZGenResponse This command uses the TPM to recover the Z value from a public point (QB) and a private key (ds).
EncryptDecrypt2Response This command is identical to TPM2_EncryptDecrypt(), except that the inData parameter is the first parameter.
EncryptDecryptResponse NOTE 1 This command is deprecated, and TPM2_EncryptDecrypt2() is preferred.
EventSequenceCompleteResponse This command adds the last part of data, if any, to an Event Sequence and returns the result in a digest list.
EvictControlResponse This command allows certain Transient Objects to be made persistent or a persistent object to be evicted.
FieldUpgradeDataResponse This command will take the actual field upgrade image to be installed on the TPM.
FieldUpgradeStartResponse This command uses platformPolicy and a TPM Vendor Authorization Key to authorize a Field Upgrade Manifest.
FirmwareReadResponse This command is used to read a copy of the current firmware installed in the TPM.
FlushContextResponse This command causes all context associated with a loaded object, sequence object, or session to be removed from TPM memory.
GetCapabilityResponse This command returns various information regarding the TPM and its current state.
GetCommandAuditDigestResponse This command returns the current value of the command audit digest, a digest of the commands being audited, and the audit hash algorithm.
GetRandomResponse This command returns the next bytesRequested octets from the random number generator (RNG).
GetSessionAuditDigestResponse This command returns a digital signature of the audit session digest.
GetTestResultResponse This command returns manufacturer-specific information regarding the results of a self-test and an indication of the test status.
GetTimeResponse This command returns the current values of Time and Clock.
HashResponse This command performs a hash operation on a data buffer and returns the results.
HashSequenceStartResponse This command starts a hash or an Event Sequence.
HierarchyChangeAuthResponse This command allows the authorization secret for a hierarchy or lockout to be changed using the current authorization value as the command authorization.
HierarchyControlResponse This command enables and disables use of a hierarchy and its associated NV storage.
HMAC_StartResponse This command starts an HMAC sequence.
HMACResponse This command performs an HMAC on the supplied data using the indicated hash algorithm.
Implementation This table contains a collection of values used in various parts of the reference code.
Implementation._N
ImplementationConstants Architecturally defined constants
ImplementationConstants._N
ImportResponse This command allows an object to be encrypted using the symmetric encryption values of a Storage Key.
IncrementalSelfTestResponse This command causes the TPM to perform a test of the selected algorithms.
LoadExternalResponse This command is used to load an object that is not a Protected Object into the TPM.
LoadResponse This command is used to load objects into the TPM.
Logic Table 4 Defines for Logic Values
Logic._N
MAC_StartResponse This command starts a MAC sequence.
MACResponse This command performs an HMAC or a block cipher MAC on the supplied data using the indicated algorithm.
MakeCredentialResponse This command allows the TPM to perform the actions required of a Certificate Authority (CA) in creating a TPM2B_ID_OBJECT containing an activation credential.
NameUnionTagValues Selector type for TPMU_NAME [tss]
NameUnionTagValues._N
NV_CertifyResponse The purpose of this command is to certify the contents of an NV Index or portion of an NV Index.
NV_ChangeAuthResponse This command allows the authorization secret for an NV Index to be changed.
NV_DefineSpaceResponse This command defines the attributes of an NV Index and causes the TPM to reserve space to hold the data associated with the NV Index.
NV_ExtendResponse This command extends a value to an area in NV memory that was previously defined by TPM2_NV_DefineSpace.
NV_GlobalWriteLockResponse The command will SET TPMA_NV_WRITELOCKED for all indexes that have their TPMA_NV_GLOBALLOCK attribute SET.
NV_IncrementResponse This command is used to increment the value in an NV Index that has the TPM_NT_COUNTER attribute.
NV_ReadLockResponse If TPMA_NV_READ_STCLEAR is SET in an Index, then this command may be used to prevent further reads of the NV Index until the next TPM2_Startup (TPM_SU_CLEAR).
NV_ReadPublicResponse This command is used to read the public area and Name of an NV Index.
NV_ReadResponse This command reads a value from an area in NV memory previously defined by TPM2_NV_DefineSpace().
NV_SetBitsResponse This command is used to SET bits in an NV Index that was created as a bit field.
NV_UndefineSpaceResponse This command removes an Index from the TPM.
NV_UndefineSpaceSpecialResponse This command allows removal of a platform-created NV Index that has TPMA_NV_POLICY_DELETE SET.
NV_WriteLockResponse If the TPMA_NV_WRITEDEFINE or TPMA_NV_WRITE_STCLEAR attributes of an NV location are SET, then this command may be used to inhibit further writes of the NV Index.
NV_WriteResponse This command writes a value to an area in NV memory that was previously defined by TPM2_NV_DefineSpace().
ObjectChangeAuthResponse This command is used to change the authorization secret for a TPM-resident object.
PCR_AllocateResponse This command is used to set the desired PCR allocation of PCR and algorithms.
PCR_EventResponse This command is used to cause an update to the indicated PCR.
PCR_ExtendResponse This command is used to cause an update to the indicated PCR.
PCR_ReadResponse This command returns the values of all PCR specified in pcrSelectionIn.
PCR_ResetResponse If the attribute of a PCR allows the PCR to be reset and proper authorization is provided, then this command may be used to set the PCR in all banks to zero.
PCR_SetAuthPolicyResponse This command is used to associate a policy with a PCR or group of PCR.
PCR_SetAuthValueResponse This command changes the authValue of a PCR or group of PCR.
PcrValue Contains a PCR index and associated hash(pcr-value) [tss]
PLATFORM These values are readable with TPM2_GetCapability().
PLATFORM._N
Policy_AC_SendSelectResponse This command allows qualification of the sending (copying) of an Object to an Attached Component (AC).
PolicyAuthorizeNVResponse This command provides a capability that is the equivalent of a revocable policy.
PolicyAuthorizeResponse This command allows policies to change.
PolicyAuthValueResponse This command allows a policy to be bound to the authorization value of the authorized entity.
PolicyCommandCodeResponse This command indicates that the authorization will be limited to a specific command code.
PolicyCounterTimerResponse This command is used to cause conditional gating of a policy based on the contents of the TPMS_TIME_INFO structure.
PolicyCpHashResponse This command is used to allow a policy to be bound to a specific command and command parameters.
PolicyDuplicationSelectResponse This command allows qualification of duplication to allow duplication to a selected new parent.
PolicyGetDigestResponse This command returns the current policyDigest of the session.
PolicyLocalityResponse This command indicates that the authorization will be limited to a specific locality.
PolicyNameHashResponse This command allows a policy to be bound to a specific set of TPM entities without being bound to the parameters of the command.
PolicyNVResponse This command is used to cause conditional gating of a policy based on the contents of an NV Index.
PolicyNvWrittenResponse This command allows a policy to be bound to the TPMA_NV_WRITTEN attributes.
PolicyORResponse This command allows options in authorizations without requiring that the TPM evaluate all of the options.
PolicyPasswordResponse This command allows a policy to be bound to the authorization value of the authorized object.
PolicyPCRResponse This command is used to cause conditional gating of a policy based on PCR.
PolicyPhysicalPresenceResponse This command indicates that physical presence will need to be asserted at the time the authorization is performed.
PolicyRestartResponse This command allows a policy authorization session to be returned to its initial state.
PolicySecretResponse This command includes a secret-based authorization to a policy.
PolicySignedResponse This command includes a signed authorization in a policy.
PolicyTemplateResponse This command allows a policy to be bound to a specific creation template.
PolicyTicketResponse This command is similar to TPM2_PolicySigned() except that it takes a ticket instead of a signed authorization.
PP_CommandsResponse This command is used to determine which commands require assertion of Physical Presence (PP) in addition to platformAuth/platformPolicy.
QuoteResponse This command is used to quote PCR values.
ReadClockResponse This command reads the current TPMS_TIME_INFO structure that contains the current setting of Time, Clock, resetCount, and restartCount.
ReadPublicResponse This command allows access to the public area of a loaded object.
RewrapResponse This command allows the TPM to serve in the role as a Duplication Authority.
RSA_DecryptResponse This command performs RSA decryption using the indicated padding scheme according to IETF RFC 3447 ((PKCS#1).
RSA_EncryptResponse This command performs RSA encryption using the indicated padding scheme according to IETF RFC 3447.
SelfTestResponse This command causes the TPM to perform a test of its capabilities.
SequenceCompleteResponse This command adds the last part of data, if any, to a hash/HMAC sequence and returns the result.
SequenceUpdateResponse This command is used to add data to a hash or HMAC sequence.
SessionIn Structure representing a session block in a command buffer [tss]
SessionOut Structure representing a session block in a response buffer [tss]
SetAlgorithmSetResponse This command allows the platform to change the set of algorithms that are used by the TPM.
SetCommandCodeAuditStatusResponse This command may be used by the Privacy Administrator or platform to change the audit status of a command or to set the hash algorithm used for the audit digest, but not both at the same time.
SetPrimaryPolicyResponse This command allows setting of the authorization policy for the lockout (lockoutPolicy), the platform hierarchy (platformPolicy), the storage hierarchy (ownerPolicy), and the endorsement hierarchy (endorsementPolicy).
SHA1 Table 12 Defines for SHA1 Hash Values
SHA1._N
SHA256 Table 13 Defines for SHA256 Hash Values
SHA256._N
SHA384 Table 14 Defines for SHA384 Hash Values
SHA384._N
SHA512 Table 15 Defines for SHA512 Hash Values
SHA512._N
ShutdownResponse This command is used to prepare the TPM for a power cycle.
SignResponse This command causes the TPM to sign an externally provided hash with the specified symmetric or asymmetric signing key.
SM3_256 Table 16 Defines for SM3_256 Hash Values
SM3_256._N
StartAuthSessionResponse This command is used to start an authorization session using alternative methods of establishing the session key (sessionKey).
StartupResponse TPM2_Startup() is always preceded by _TPM_Init, which is the physical indication that TPM initialization is necessary because of a system-wide reset.
StirRandomResponse This command is used to add "additional information" to the RNG state.
TestParmsResponse This command is used to check to see if specific combinations of algorithm parameters are supported.
TPM_AE These constants are the TCG-defined error values returned by an AC.
TPM_AE._N
TPM_ALG_ID Table 2 is the list of algorithms to which the TCG has assigned an algorithm identifier along with its numeric identifier.
TPM_ALG_ID._N
TPM_AT These constants are used in TPM2_AC_GetCapability() to indicate the first tagged value returned from an attached component.
TPM_AT._N
TPM_CAP The TPM_CAP values are used in TPM2_GetCapability() to select the type of the value to be returned.
TPM_CAP._N
TPM_CC Table 12 lists the command codes and their attributes.
TPM_CC._N
TPM_CLOCK_ADJUST A TPM_CLOCK_ADJUST value is used to change the rate at which the TPM internal oscillator is divided.
TPM_CLOCK_ADJUST._N
TPM_ECC_CURVE Table 3 is the list of identifiers for TCG-registered curve ID values for elliptic curve cryptography.
TPM_ECC_CURVE._N
TPM_EO Table 18 Definition of (UINT16) TPM_EO Constants (IN/OUT)
TPM_EO._N
TPM_GENERATED This constant value differentiates TPM-generated structures from non-TPM structures.
TPM_GENERATED._N
TPM_HANDLE TPM object handle (and related data)
TPM_HC The definitions in Table 29 are used to define many of the interface data types.
TPM_HC._N
TPM_HT The 32-bit handle space is divided into 256 regions of equal size with 224 values in each.
TPM_HT._N
TPM_NT This table lists the values of the TPM_NT field of a TPMA_NV.
TPM_NT._N
TPM_NV_INDEX A TPM_NV_INDEX is used to reference a defined location in NV memory.
TPM_NV_INDEX._N
TPM_PS The platform values in Table 25 are used for the TPM_PT_PS_FAMILY_INDICATOR.
TPM_PS._N
TPM_PT The TPM_PT constants are used in TPM2_GetCapability(capability = TPM_CAP_TPM_PROPERTIES) to indicate the property being selected or returned.
TPM_PT_PCR The TPM_PT_PCR constants are used in TPM2_GetCapability() to indicate the property being selected or returned.
TPM_PT_PCR._N
TPM_PT._N
TPM_RC In general, response codes defined in TPM 2.0 Part 2 will be unmarshaling errors and will have the F (format) bit SET.
TPM_RC._N
TPM_RH Table 28 lists the architecturally defined handles that cannot be changed.
TPM_RH._N
TPM_SE This type is used in TPM2_StartAuthSession() to indicate the type of the session to be created.
TPM_SE._N
TPM_SPEC These values are readable with TPM2_GetCapability().
TPM_SPEC._N
TPM_ST Structure tags are used to disambiguate structures.
TPM_ST._N
TPM_SU These values are used in TPM2_Startup() to indicate the shutdown and startup mode.
TPM_SU._N
TPM2_AC_GetCapability_REQUEST The purpose of this command is to obtain information about an Attached Component referenced by an AC handle.
TPM2_AC_Send_REQUEST The purpose of this command is to send (copy) a loaded object from the TPM to an Attached Component.
TPM2_ActivateCredential_REQUEST This command enables the association of a credential with an object in a way that ensures that the TPM has validated the parameters of the credentialed object.
TPM2_Certify_REQUEST The purpose of this command is to prove that an object with a specific Name is loaded in the TPM.
TPM2_CertifyCreation_REQUEST This command is used to prove the association between an object and its creation data.
TPM2_ChangeEPS_REQUEST This replaces the current endorsement primary seed (EPS) with a value from the RNG and sets the Endorsement hierarchy controls to their default initialization values: ehEnable is SET, endorsementAuth and endorsementPolicy are both set to the Empty Buffer.
TPM2_ChangePPS_REQUEST This replaces the current platform primary seed (PPS) with a value from the RNG and sets platformPolicy to the default initialization value (the Empty Buffer).
TPM2_Clear_REQUEST This command removes all TPM context associated with a specific Owner.
TPM2_ClearControl_REQUEST TPM2_ClearControl() disables and enables the execution of TPM2_Clear().
TPM2_ClockRateAdjust_REQUEST This command adjusts the rate of advance of Clock and Time to provide a better approximation to real time.
TPM2_ClockSet_REQUEST This command is used to advance the value of the TPMs Clock.
TPM2_Commit_REQUEST TPM2_Commit() performs the first part of an ECC anonymous signing operation.
TPM2_ContextLoad_REQUEST This command is used to reload a context that has been saved by TPM2_ContextSave().
TPM2_ContextSave_REQUEST This command saves a session context, object context, or sequence object context outside the TPM.
TPM2_Create_REQUEST This command is used to create an object that can be loaded into a TPM using TPM2_Load().
TPM2_CreateLoaded_REQUEST This command creates an object and loads it in the TPM.
TPM2_CreatePrimary_REQUEST This command is used to create a Primary Object under one of the Primary Seeds or a Temporary Object under TPM_RH_NULL.
TPM2_DictionaryAttackLockReset_REQUEST This command cancels the effect of a TPM lockout due to a number of successive authorization failures.
TPM2_DictionaryAttackParameters_REQUEST This command changes the lockout parameters.
TPM2_Duplicate_REQUEST This command duplicates a loaded object so that it may be used in a different hierarchy.
TPM2_EC_Ephemeral_REQUEST TPM2_EC_Ephemeral() creates an ephemeral key for use in a two-phase key exchange protocol.
TPM2_ECC_Parameters_REQUEST This command returns the parameters of an ECC curve identified by its TCG-assigned curveID.
TPM2_ECDH_KeyGen_REQUEST This command uses the TPM to generate an ephemeral key pair (de, Qe where Qe [de]G).
TPM2_ECDH_ZGen_REQUEST This command uses the TPM to recover the Z value from a public point (QB) and a private key (ds).
TPM2_EncryptDecrypt_REQUEST NOTE 1 This command is deprecated, and TPM2_EncryptDecrypt2() is preferred.
TPM2_EncryptDecrypt2_REQUEST This command is identical to TPM2_EncryptDecrypt(), except that the inData parameter is the first parameter.
TPM2_EventSequenceComplete_REQUEST This command adds the last part of data, if any, to an Event Sequence and returns the result in a digest list.
TPM2_EvictControl_REQUEST This command allows certain Transient Objects to be made persistent or a persistent object to be evicted.
TPM2_FieldUpgradeData_REQUEST This command will take the actual field upgrade image to be installed on the TPM.
TPM2_FieldUpgradeStart_REQUEST This command uses platformPolicy and a TPM Vendor Authorization Key to authorize a Field Upgrade Manifest.
TPM2_FirmwareRead_REQUEST This command is used to read a copy of the current firmware installed in the TPM.
TPM2_FlushContext_REQUEST This command causes all context associated with a loaded object, sequence object, or session to be removed from TPM memory.
TPM2_GetCapability_REQUEST This command returns various information regarding the TPM and its current state.
TPM2_GetCommandAuditDigest_REQUEST This command returns the current value of the command audit digest, a digest of the commands being audited, and the audit hash algorithm.
TPM2_GetRandom_REQUEST This command returns the next bytesRequested octets from the random number generator (RNG).
TPM2_GetSessionAuditDigest_REQUEST This command returns a digital signature of the audit session digest.
TPM2_GetTestResult_REQUEST This command returns manufacturer-specific information regarding the results of a self-test and an indication of the test status.
TPM2_GetTime_REQUEST This command returns the current values of Time and Clock.
TPM2_Hash_REQUEST This command performs a hash operation on a data buffer and returns the results.
TPM2_HashSequenceStart_REQUEST This command starts a hash or an Event Sequence.
TPM2_HierarchyChangeAuth_REQUEST This command allows the authorization secret for a hierarchy or lockout to be changed using the current authorization value as the command authorization.
TPM2_HierarchyControl_REQUEST This command enables and disables use of a hierarchy and its associated NV storage.
TPM2_HMAC_REQUEST This command performs an HMAC on the supplied data using the indicated hash algorithm.
TPM2_HMAC_Start_REQUEST This command starts an HMAC sequence.
TPM2_Import_REQUEST This command allows an object to be encrypted using the symmetric encryption values of a Storage Key.
TPM2_IncrementalSelfTest_REQUEST This command causes the TPM to perform a test of the selected algorithms.
TPM2_Load_REQUEST This command is used to load objects into the TPM.
TPM2_LoadExternal_REQUEST This command is used to load an object that is not a Protected Object into the TPM.
TPM2_MAC_REQUEST This command performs an HMAC or a block cipher MAC on the supplied data using the indicated algorithm.
TPM2_MAC_Start_REQUEST This command starts a MAC sequence.
TPM2_MakeCredential_REQUEST This command allows the TPM to perform the actions required of a Certificate Authority (CA) in creating a TPM2B_ID_OBJECT containing an activation credential.
TPM2_NV_Certify_REQUEST The purpose of this command is to certify the contents of an NV Index or portion of an NV Index.
TPM2_NV_ChangeAuth_REQUEST This command allows the authorization secret for an NV Index to be changed.
TPM2_NV_DefineSpace_REQUEST This command defines the attributes of an NV Index and causes the TPM to reserve space to hold the data associated with the NV Index.
TPM2_NV_Extend_REQUEST This command extends a value to an area in NV memory that was previously defined by TPM2_NV_DefineSpace.
TPM2_NV_GlobalWriteLock_REQUEST The command will SET TPMA_NV_WRITELOCKED for all indexes that have their TPMA_NV_GLOBALLOCK attribute SET.
TPM2_NV_Increment_REQUEST This command is used to increment the value in an NV Index that has the TPM_NT_COUNTER attribute.
TPM2_NV_Read_REQUEST This command reads a value from an area in NV memory previously defined by TPM2_NV_DefineSpace().
TPM2_NV_ReadLock_REQUEST If TPMA_NV_READ_STCLEAR is SET in an Index, then this command may be used to prevent further reads of the NV Index until the next TPM2_Startup (TPM_SU_CLEAR).
TPM2_NV_ReadPublic_REQUEST This command is used to read the public area and Name of an NV Index.
TPM2_NV_SetBits_REQUEST This command is used to SET bits in an NV Index that was created as a bit field.
TPM2_NV_UndefineSpace_REQUEST This command removes an Index from the TPM.
TPM2_NV_UndefineSpaceSpecial_REQUEST This command allows removal of a platform-created NV Index that has TPMA_NV_POLICY_DELETE SET.
TPM2_NV_Write_REQUEST This command writes a value to an area in NV memory that was previously defined by TPM2_NV_DefineSpace().
TPM2_NV_WriteLock_REQUEST If the TPMA_NV_WRITEDEFINE or TPMA_NV_WRITE_STCLEAR attributes of an NV location are SET, then this command may be used to inhibit further writes of the NV Index.
TPM2_ObjectChangeAuth_REQUEST This command is used to change the authorization secret for a TPM-resident object.
TPM2_PCR_Allocate_REQUEST This command is used to set the desired PCR allocation of PCR and algorithms.
TPM2_PCR_Event_REQUEST This command is used to cause an update to the indicated PCR.
TPM2_PCR_Extend_REQUEST This command is used to cause an update to the indicated PCR.
TPM2_PCR_Read_REQUEST This command returns the values of all PCR specified in pcrSelectionIn.
TPM2_PCR_Reset_REQUEST If the attribute of a PCR allows the PCR to be reset and proper authorization is provided, then this command may be used to set the PCR in all banks to zero.
TPM2_PCR_SetAuthPolicy_REQUEST This command is used to associate a policy with a PCR or group of PCR.
TPM2_PCR_SetAuthValue_REQUEST This command changes the authValue of a PCR or group of PCR.
TPM2_Policy_AC_SendSelect_REQUEST This command allows qualification of the sending (copying) of an Object to an Attached Component (AC).
TPM2_PolicyAuthorize_REQUEST This command allows policies to change.
TPM2_PolicyAuthorizeNV_REQUEST This command provides a capability that is the equivalent of a revocable policy.
TPM2_PolicyAuthValue_REQUEST This command allows a policy to be bound to the authorization value of the authorized entity.
TPM2_PolicyCommandCode_REQUEST This command indicates that the authorization will be limited to a specific command code.
TPM2_PolicyCounterTimer_REQUEST This command is used to cause conditional gating of a policy based on the contents of the TPMS_TIME_INFO structure.
TPM2_PolicyCpHash_REQUEST This command is used to allow a policy to be bound to a specific command and command parameters.
TPM2_PolicyDuplicationSelect_REQUEST This command allows qualification of duplication to allow duplication to a selected new parent.
TPM2_PolicyGetDigest_REQUEST This command returns the current policyDigest of the session.
TPM2_PolicyLocality_REQUEST This command indicates that the authorization will be limited to a specific locality.
TPM2_PolicyNameHash_REQUEST This command allows a policy to be bound to a specific set of TPM entities without being bound to the parameters of the command.
TPM2_PolicyNV_REQUEST This command is used to cause conditional gating of a policy based on the contents of an NV Index.
TPM2_PolicyNvWritten_REQUEST This command allows a policy to be bound to the TPMA_NV_WRITTEN attributes.
TPM2_PolicyOR_REQUEST This command allows options in authorizations without requiring that the TPM evaluate all of the options.
TPM2_PolicyPassword_REQUEST This command allows a policy to be bound to the authorization value of the authorized object.
TPM2_PolicyPCR_REQUEST This command is used to cause conditional gating of a policy based on PCR.
TPM2_PolicyPhysicalPresence_REQUEST This command indicates that physical presence will need to be asserted at the time the authorization is performed.
TPM2_PolicyRestart_REQUEST This command allows a policy authorization session to be returned to its initial state.
TPM2_PolicySecret_REQUEST This command includes a secret-based authorization to a policy.
TPM2_PolicySigned_REQUEST This command includes a signed authorization in a policy.
TPM2_PolicyTemplate_REQUEST This command allows a policy to be bound to a specific creation template.
TPM2_PolicyTicket_REQUEST This command is similar to TPM2_PolicySigned() except that it takes a ticket instead of a signed authorization.
TPM2_PP_Commands_REQUEST This command is used to determine which commands require assertion of Physical Presence (PP) in addition to platformAuth/platformPolicy.
TPM2_Quote_REQUEST This command is used to quote PCR values.
TPM2_ReadClock_REQUEST This command reads the current TPMS_TIME_INFO structure that contains the current setting of Time, Clock, resetCount, and restartCount.
TPM2_ReadPublic_REQUEST This command allows access to the public area of a loaded object.
TPM2_Rewrap_REQUEST This command allows the TPM to serve in the role as a Duplication Authority.
TPM2_RSA_Decrypt_REQUEST This command performs RSA decryption using the indicated padding scheme according to IETF RFC 3447 ((PKCS#1).
TPM2_RSA_Encrypt_REQUEST This command performs RSA encryption using the indicated padding scheme according to IETF RFC 3447.
TPM2_SelfTest_REQUEST This command causes the TPM to perform a test of its capabilities.
TPM2_SequenceComplete_REQUEST This command adds the last part of data, if any, to a hash/HMAC sequence and returns the result.
TPM2_SequenceUpdate_REQUEST This command is used to add data to a hash or HMAC sequence.
TPM2_SetAlgorithmSet_REQUEST This command allows the platform to change the set of algorithms that are used by the TPM.
TPM2_SetCommandCodeAuditStatus_REQUEST This command may be used by the Privacy Administrator or platform to change the audit status of a command or to set the hash algorithm used for the audit digest, but not both at the same time.
TPM2_SetPrimaryPolicy_REQUEST This command allows setting of the authorization policy for the lockout (lockoutPolicy), the platform hierarchy (platformPolicy), the storage hierarchy (ownerPolicy), and the endorsement hierarchy (endorsementPolicy).
TPM2_Shutdown_REQUEST This command is used to prepare the TPM for a power cycle.
TPM2_Sign_REQUEST This command causes the TPM to sign an externally provided hash with the specified symmetric or asymmetric signing key.
TPM2_StartAuthSession_REQUEST This command is used to start an authorization session using alternative methods of establishing the session key (sessionKey).
TPM2_Startup_REQUEST TPM2_Startup() is always preceded by _TPM_Init, which is the physical indication that TPM initialization is necessary because of a system-wide reset.
TPM2_StirRandom_REQUEST This command is used to add "additional information" to the RNG state.
TPM2_TestParms_REQUEST This command is used to check to see if specific combinations of algorithm parameters are supported.
TPM2_Unseal_REQUEST This command returns the data in a loaded Sealed Data Object.
TPM2_Vendor_TCG_Test_REQUEST This is a placeholder to allow testing of the dispatch code.
TPM2_VerifySignature_REQUEST This command uses loaded keys to validate a signature on a message with the message digest passed to the TPM.
TPM2_ZGen_2Phase_REQUEST This command supports two-phase key exchange protocols.
TPM2B_ATTEST This sized buffer to contain the signed structure.
TPM2B_AUTH This structure is used for an authorization value and limits an authValue to being no larger than the largest digest produced by a TPM.
TPM2B_CONTEXT_DATA This structure is used in a TPMS_CONTEXT.
TPM2B_CONTEXT_SENSITIVE This structure holds the object or session context data.
TPM2B_CREATION_DATA This structure is created by TPM2_Create() and TPM2_CreatePrimary().
TPM2B_DATA This structure is used for a data buffer that is required to be no larger than the size of the Name of an object.
TPM2B_DERIVE Table 137 Definition of TPM2B_DERIVE Structure
TPM2B_DIGEST This structure is used for a sized buffer that cannot be larger than the largest digest produced by any hash algorithm implemented on the TPM.
TPM2B_DIGEST_Keyedhash Auto-derived from TPM2B_DIGEST
TPM2B_DIGEST_Symcipher Auto-derived from TPM2B_DIGEST
TPM2B_ECC_PARAMETER This sized buffer holds the largest ECC parameter (coordinate) supported by the TPM.
TPM2B_ECC_POINT This structure is defined to allow a point to be a single sized parameter so that it may be encrypted.
TPM2B_ENCRYPTED_SECRET Table 182 Definition of TPM2B_ENCRYPTED_SECRET Structure
TPM2B_EVENT This type is a sized buffer that can hold event data.
TPM2B_ID_OBJECT This structure is an output from TPM2_MakeCredential() and is an input to TPM2_ActivateCredential().
TPM2B_IV This structure is used for passing an initial value for a symmetric block cipher to or from the TPM.
TPM2B_LABEL This buffer holds a label or context value.
TPM2B_MAX_BUFFER This type is a sized buffer that can hold a maximally sized buffer for commands that use a large data buffer such as TPM2_Hash(), TPM2_SequenceUpdate(), or TPM2_FieldUpgradeData().
TPM2B_MAX_NV_BUFFER This type is a sized buffer that can hold a maximally sized buffer for NV data commands such as TPM2_NV_Read(), TPM2_NV_Write(), and TPM2_NV_Certify().
TPM2B_NAME This buffer holds a Name for any entity type.
TPM2B_NONCE Table 76 Definition of Types for TPM2B_NONCE
TPM2B_NV_PUBLIC This structure is used when a TPMS_NV_PUBLIC is sent on the TPM interface.
TPM2B_OPERAND This type is a sized buffer that can hold an operand for a comparison with an NV Index location.
TPM2B_PRIVATE The TPM2B_PRIVATE structure is used as a parameter in multiple commands that create, load, and modify the sensitive area of an object.
TPM2B_PRIVATE_KEY_RSA This sized buffer holds the largest RSA prime number supported by the TPM.
TPM2B_PRIVATE_VENDOR_SPECIFIC This structure is defined for coding purposes.
TPM2B_PUBLIC This sized buffer is used to embed a TPMT_PUBLIC in a load command and in any response that returns a public area.
TPM2B_PUBLIC_KEY_RSA This sized buffer holds the largest RSA public key supported by the TPM.
TPM2B_SENSITIVE The TPM2B_SENSITIVE structure is used as a parameter in TPM2_LoadExternal().
TPM2B_SENSITIVE_CREATE This structure contains the sensitive creation data in a sized buffer.
TPM2B_SENSITIVE_DATA This buffer wraps the TPMU_SENSITIVE_CREATE structure.
TPM2B_SYM_KEY This structure is used to hold a symmetric key in the sensitive area of an asymmetric object.
TPM2B_TEMPLATE This sized buffer is used to embed a TPMT_TEMPLATE for TPM2_CreateLoaded().
TPM2B_TIMEOUT This TPM-dependent structure is used to provide the timeout value for an authorization.
TPMA_ALGORITHM This structure defines the attributes of an algorithm.
TPMA_ALGORITHM._N
TPMA_CC This structure defines the attributes of a command from a context management perspective.
TPMA_CC._N
TPMA_LOCALITY In a TPMS_CREATION_DATA structure, this structure is used to indicate the locality of the command that created the object.
TPMA_LOCALITY._N
TPMA_MEMORY This structure of this attribute is used to report the memory management method used by the TPM for transient objects and authorization sessions.
TPMA_MEMORY._N
TPMA_MODES This structure of this attribute is used to report that the TPM is designed for these modes.
TPMA_MODES._N
TPMA_NV This structure allows the TPM to keep track of the data and permissions to manipulate an NV Index.
TPMA_NV._N
TPMA_OBJECT This attribute structure indicates an objects use, its authorization types, and its relationship to other objects.
TPMA_OBJECT._N
TPMA_PERMANENT The attributes in this structure are persistent and are not changed as a result of _TPM_Init or any TPM2_Startup().
TPMA_PERMANENT._N
TPMA_SESSION This octet in each session is used to identify the session type, indicate its relationship to any handles in the command, and indicate its use in parameter encryption.
TPMA_SESSION._N
TPMA_STARTUP_CLEAR This structure may be read using TPM2_GetCapability(capability = TPM_CAP_TPM_PROPERTIES, property = TPM_PT_STARTUP_CLEAR).
TPMA_STARTUP_CLEAR._N
TPML_AC_CAPABILITIES This list is only used in TPM2_AC_GetCapability().
TPML_ALG This list is returned by TPM2_IncrementalSelfTest().
TPML_ALG_PROPERTY This list is used to report on a list of algorithm attributes.
TPML_CC A list of command codes may be input to the TPM or returned by the TPM depending on the command.
TPML_CCA This list is only used in TPM2_GetCapability(capability = TPM_CAP_COMMANDS).
TPML_DIGEST This list is used to convey a list of digest values.
TPML_DIGEST_VALUES This list is used to convey a list of digest values.
TPML_ECC_CURVE This list is used to report the ECC curve ID values supported by the TPM.
TPML_HANDLE This structure is used when the TPM returns a list of loaded handles when the capability in TPM2_GetCapability() is TPM_CAP_HANDLE.
TPML_PCR_SELECTION This list is used to indicate the PCR that are included in a selection when more than one PCR value may be selected.
TPML_TAGGED_PCR_PROPERTY This list is used to report on a list of properties that are TPMS_PCR_SELECT values.
TPML_TAGGED_POLICY This list is used to report the authorization policy values for permanent handles.
TPML_TAGGED_TPM_PROPERTY This list is used to report on a list of properties that are TPMS_TAGGED_PROPERTY values.
TPMS_AC_OUTPUT TPMS_AC_OUTPUT is used to return information about an AC.
TPMS_AES_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_ALG_PROPERTY This structure is used to report the properties of an algorithm identifier.
TPMS_ALGORITHM_DESCRIPTION This structure is a return value for a TPM2_GetCapability() that reads the installed algorithms.
TPMS_ALGORITHM_DETAIL_ECC This structure is used to report on the curve parameters of an ECC curve.
TPMS_ANY_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_ASYM_PARMS This structure contains the common public area parameters for an asymmetric key.
TPMS_ATTEST This structure is used on each TPM-generated signed structure.
TPMS_AUTH_COMMAND This is the format used for each of the authorizations in the session area of a command.
TPMS_CAMELLIA_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_CAPABILITY_DATA This data area is returned in response to a TPM2_GetCapability().
TPMS_CERTIFY_INFO This is the attested data for TPM2_Certify().
TPMS_CLOCK_INFO This structure is used in each of the attestation commands.
TPMS_COMMAND_AUDIT_INFO This is the attested data for TPM2_GetCommandAuditDigest().
TPMS_CONTEXT This structure is used in TPM2_ContextLoad() and TPM2_ContextSave().
TPMS_CONTEXT_DATA This structure holds the integrity value and the encrypted data for a context.
TPMS_CREATION_DATA This structure provides information relating to the creation environment for the object.
TPMS_CREATION_INFO This is the attested data for TPM2_CertifyCreation().
TPMS_DERIVE This structure contains the label and context fields for a derived object.
TPMS_ECC_PARMS This structure contains the parameters for prime modulus ECC.
TPMS_ECC_POINT This structure holds two ECC coordinates that, together, make up an ECC point.
TPMS_EMPTY This structure is used as a placeholder.
TPMS_ENC_SCHEME_OAEP These are the RSA encryption schemes that only need a hash algorithm as a controlling parameter.
TPMS_ENC_SCHEME_RSAES These are the RSA encryption schemes that only need a hash algorithm as a controlling parameter.
TPMS_ID_OBJECT This structure is used for sizing the TPM2B_ID_OBJECT.
TPMS_KEY_SCHEME_ECDH These are the ECC schemes that only need a hash algorithm as a controlling parameter.
TPMS_KEY_SCHEME_ECMQV These are the ECC schemes that only need a hash algorithm as a controlling parameter.
TPMS_KEYEDHASH_PARMS This structure describes the parameters that would appear in the public area of a KEYEDHASH object.
TPMS_NULL_ASYM_SCHEME Custom data structure representing an empty element (i.e.
TPMS_NULL_KDF_SCHEME Custom data structure representing an empty element (i.e.
TPMS_NULL_SCHEME_KEYEDHASH Custom data structure representing an empty element (i.e.
TPMS_NULL_SIG_SCHEME Custom data structure representing an empty element (i.e.
TPMS_NULL_SIGNATURE Custom data structure representing an empty element (i.e.
TPMS_NULL_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_NULL_SYM_KEY_BITS Custom data structure representing an empty element (i.e.
TPMS_NULL_SYM_MODE Custom data structure representing an empty element (i.e.
TPMS_NULL_UNION Base class for empty union elements.
TPMS_NV_CERTIFY_INFO This structure contains the Name and contents of the selected NV Index that is certified by TPM2_NV_Certify().
TPMS_NV_PIN_COUNTER_PARAMETERS This is the data that can be written to and read from a TPM_NT_PIN_PASS or TPM_NT_PIN_FAIL non-volatile index.
TPMS_NV_PUBLIC This structure describes an NV Index.
TPMS_PCR_SELECT This structure provides a standard method of specifying a list of PCR.
TPMS_PCR_SELECTION Table 87 Definition of TPMS_PCR_SELECTION Structure
TPMS_QUOTE_INFO This is the attested data for TPM2_Quote().
TPMS_RSA_PARMS A TPM compatible with this specification and supporting RSA shall support two primes and an exponent of zero.
TPMS_SCHEME_ECDAA This definition is for split signing schemes that require a commit count.
TPMS_SCHEME_ECDH Underlying type comment: These are the ECC schemes that only need a hash algorithm as a controlling parameter.
TPMS_SCHEME_ECDSA Underlying type comment: Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SCHEME_ECMQV Underlying type comment: These are the ECC schemes that only need a hash algorithm as a controlling parameter.
TPMS_SCHEME_ECSCHNORR Underlying type comment: Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SCHEME_HASH This structure is the scheme data for schemes that only require a hash to complete their definition.
TPMS_SCHEME_HMAC Table 145 Definition of Types for HMAC_SIG_SCHEME
TPMS_SCHEME_KDF1_SP800_108 These structures are used to define the key derivation for symmetric secret sharing using asymmetric methods.
TPMS_SCHEME_KDF1_SP800_56A These structures are used to define the key derivation for symmetric secret sharing using asymmetric methods.
TPMS_SCHEME_KDF2 These structures are used to define the key derivation for symmetric secret sharing using asymmetric methods.
TPMS_SCHEME_MGF1 These structures are used to define the key derivation for symmetric secret sharing using asymmetric methods.
TPMS_SCHEME_OAEP Underlying type comment: These are the RSA encryption schemes that only need a hash algorithm as a controlling parameter.
TPMS_SCHEME_RSAES Underlying type comment: These are the RSA encryption schemes that only need a hash algorithm as a controlling parameter.
TPMS_SCHEME_RSAPSS Underlying type comment: These are the RSA schemes that only need a hash algorithm as a scheme parameter.
TPMS_SCHEME_RSASSA Underlying type comment: These are the RSA schemes that only need a hash algorithm as a scheme parameter.
TPMS_SCHEME_SM2 Underlying type comment: Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SCHEME_XOR This structure is for the XOR encryption scheme.
TPMS_SENSITIVE_CREATE This structure defines the values to be placed in the sensitive area of a created object.
TPMS_SESSION_AUDIT_INFO This is the attested data for TPM2_GetSessionAuditDigest().
TPMS_SIG_SCHEME_ECDAA Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SIG_SCHEME_ECDSA Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SIG_SCHEME_ECSCHNORR Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SIG_SCHEME_RSAPSS These are the RSA schemes that only need a hash algorithm as a scheme parameter.
TPMS_SIG_SCHEME_RSASSA These are the RSA schemes that only need a hash algorithm as a scheme parameter.
TPMS_SIG_SCHEME_SM2 Most of the ECC signature schemes only require a hash algorithm to complete the definition and can be typed as TPMS_SCHEME_HASH.
TPMS_SIGNATURE_ECC Table 177 Definition of {ECC} TPMS_SIGNATURE_ECC Structure
TPMS_SIGNATURE_ECDAA Table 177 Definition of {ECC} TPMS_SIGNATURE_ECC Structure
TPMS_SIGNATURE_ECDSA Table 177 Definition of {ECC} TPMS_SIGNATURE_ECC Structure
TPMS_SIGNATURE_ECSCHNORR Table 177 Definition of {ECC} TPMS_SIGNATURE_ECC Structure
TPMS_SIGNATURE_RSA Table 175 Definition of {RSA} TPMS_SIGNATURE_RSA Structure
TPMS_SIGNATURE_RSAPSS Table 175 Definition of {RSA} TPMS_SIGNATURE_RSA Structure
TPMS_SIGNATURE_RSASSA Table 175 Definition of {RSA} TPMS_SIGNATURE_RSA Structure
TPMS_SIGNATURE_SM2 Table 177 Definition of {ECC} TPMS_SIGNATURE_ECC Structure
TPMS_SM4_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_SYMCIPHER_PARMS This structure contains the parameters for a symmetric block cipher object.
TPMS_TAGGED_PCR_SELECT This structure is used in TPM2_GetCapability() to return the attributes of the PCR.
TPMS_TAGGED_POLICY This structure is used in TPM2_GetCapability() to return the policy associated with a permanent handle.
TPMS_TAGGED_PROPERTY This structure is used to report the properties that are UINT32 values.
TPMS_TDES_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_TIME_ATTEST_INFO This structure is used when the TPM performs TPM2_GetTime.
TPMS_TIME_INFO This structure is used in the TPM2_GetTime() attestation.
TPMS_XOR_SYM_DETAILS Custom data structure representing an empty element (i.e.
TPMS_XOR_SYM_MODE Custom data structure representing an empty element (i.e.
TPMT_ASYM_SCHEME This structure is defined to allow overlay of all of the schemes for any asymmetric object.
TPMT_ECC_SCHEME Table 173 Definition of (TPMT_SIG_SCHEME) {ECC} TPMT_ECC_SCHEME Structure
TPMT_HA TPM Hash structure
TPMT_KDF_SCHEME Table 157 Definition of TPMT_KDF_SCHEME Structure
TPMT_KEYEDHASH_SCHEME This structure is used for a hash signing object.
TPMT_PUBLIC Table 191 defines the public area structure.
TPMT_PUBLIC_PARMS This structure is used in TPM2_TestParms() to validate that a set of algorithm parameters is supported by the TPM.
TPMT_RSA_DECRYPT Table 164 Definition of {RSA} TPMT_RSA_DECRYPT Structure
TPMT_RSA_SCHEME Table 162 Definition of {RSA} TPMT_RSA_SCHEME Structure
TPMT_SENSITIVE Table 196 Definition of TPMT_SENSITIVE Structure
TPMT_SIG_SCHEME Table 152 Definition of TPMT_SIG_SCHEME Structure
TPMT_SIGNATURE Table 180 shows the basic algorithm-agile structure when a symmetric or asymmetric signature is indicated.
TPMT_SYM_DEF The TPMT_SYM_DEF structure is used to select an algorithm to be used for parameter encryption in those cases when different symmetric algorithms may be selected.
TPMT_SYM_DEF_OBJECT This structure is used when different symmetric block cipher (not XOR) algorithms may be selected.
TPMT_TK_AUTH This ticket is produced by TPM2_PolicySigned() and TPM2_PolicySecret() when the authorization has an expiration time.
TPMT_TK_CREATION This ticket is produced by TPM2_Create() or TPM2_CreatePrimary().
TPMT_TK_HASHCHECK This ticket is produced by TPM2_SequenceComplete() when the message that was digested did not start with TPM_GENERATED_VALUE.
TPMT_TK_VERIFIED This ticket is produced by TPM2_VerifySignature().
TPMU_ASYM_SCHEME This union of all asymmetric schemes is used in each of the asymmetric scheme structures.
TPMU_ATTEST Table 122 Definition of TPMU_ATTEST Union (OUT)
TPMU_CAPABILITIES Table 110 Definition of TPMU_CAPABILITIES Union (OUT)
TPMU_KDF_SCHEME Table 156 Definition of TPMU_KDF_SCHEME Union (IN/OUT, S)
TPMU_PUBLIC_ID This is the union of all values allowed in in the unique field of a TPMT_PUBLIC.
TPMU_PUBLIC_PARMS Table 189 defines the possible parameter definition structures that may be contained in the public portion of a key.
TPMU_SCHEME_KEYEDHASH Table 147 Definition of TPMU_SCHEME_KEYEDHASH Union (IN/OUT, S)
TPMU_SENSITIVE_COMPOSITE Table 195 Definition of TPMU_SENSITIVE_COMPOSITE Union (IN/OUT, S)
TPMU_SENSITIVE_CREATE This structure allows a TPM2B_SENSITIVE_CREATE structure to carry either a TPM2B_SENSITVE_DATA or a TPM2B_DERIVE structure.
TPMU_SIG_SCHEME The union of all of the signature schemes.
TPMU_SIGNATURE A TPMU_SIGNATURE_COMPOSITE is a union of the various signatures that are supported by a particular TPM implementation.
TPMU_SYM_DETAILS This union allows additional parameters to be added for a symmetric cipher.
TPMU_SYM_KEY_BITS This union is used to collect the symmetric encryption key sizes.
TPMU_SYM_MODE This is the union of all modes for all symmetric algorithms.
TSS_KEY Contains the public and private part of a TPM key
TssObject Contains the public and the plaintext-sensitive and/or encrypted private part of a TPM key (or other object)
UnsealResponse This command returns the data in a loaded Sealed Data Object.
Vendor_TCG_TestResponse This is a placeholder to allow testing of the dispatch code.
VerifySignatureResponse This command uses loaded keys to validate a signature on a message with the message digest passed to the TPM.
ZGen_2PhaseResponse This command supports two-phase key exchange protocols.